Oversigt over specifikationer
-
Measured variables
NO, NO2, NH3, SO2
-
Process temperature
≤ +550 °C
-
Ambient temperature range
–20 °C ... +55 °C
Temperature change maximum ±10 °C/h -
Hazardous area approvals
IECEx: Ex pzc op is [ia] IIC T3 Gc
ATEX: II 3G Ex pzc op is [ia] IIC T3 Gc
Anvendelsesområde
The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3, pressure and temperature in the gas duct. Direct, fast and without gas sampling and transport. Due to self-monitoring, the measured values are reliable. In case of a malfunction, an early warning will be shown. For emission measurement of SO2 and NO, the GM32 is tested for suitability according to European standard EN 15267. An Ex-type with extensive safety functions and sophisticated system technology is also available.
For monitoring and control in flue gas purification, such as denitrification plants, desulfurization plants and converters
Emissions monitoring according to EU directives or local regulations
Device properties:
No gas sampling, no gas transport, no gas conditioning
Up to four measurands at the same time, plus process temperature and pressures
Numerous independent measuring ranges with consistent accuracy
Automated self-test function (QAL3) without test gases
Overpressure encapsulated type Ex-zone 2
Fordele
Nearly uncompromised measured values measured directly in the gas duct
Short-term process deviations can be measured
Representative measurement by selection of cross-duct or measuring probe type
Fast on-site service possible due to modular design
Long maintenance-free intervals
Cost-effective in-situ gas analyzer — Ex-type also available
Low cost of installation and operation, no test gases required
-
Standardprodukter
- Pålidelige og robuste med lav vedligeholdelse
Teknisk ydeevne
Enkelhed
-
Specialiserede produkter
- Designet til krævende applikationer
Teknisk ydeevne
Enkelhed
Variabel
| FLEX valg | Teknisk ydeevne | Enkelhed |
|---|---|---|
Fundamental Få dækket dine basale målebehov |
Teknisk ydeevne
|
Enkelhed
|
Lean Administrer nemt dine kerneprocesser |
Teknisk ydeevne
|
Enkelhed
|
Extended Optimer dine processer med innovative teknologier |
Teknisk ydeevne
|
Enkelhed
|
Xpert Til de mest udfordrende applikationer |
Teknisk ydeevne
|
Enkelhed
Variabel |
Loading alternative products
Succeshistorier
Måske også interessant for dig
-
-
Tekniske oplysninger (TI)
GM32, measuring probe (TI)
In-situ Gas Analyzer, Measuring Probe Version
EN DA 01/01/2025Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
6.8 MB
Filnavn:
8030993_AE00_TI_GM32_Probe_en_V1-4_2013-11_EHS.pdf
-
-
-
Betjeningsvejledning (BA)
GMK03 - Gas Test Unit
The GMK03 gas test unit is used to test the linearity of the
measurement results of gas analyzers as required for a
metrological quality test (e.g. for QAL2, QAL3). For this purpose,
the GMK03 gas test unit can simulate several graded test gas
concentrations with a single (suitable) test gas.EN DA 01/05/2025Sprog:
Engelsk
Version:
01/05/2025
Filstørrelse:
4.5 MB
Filnavn:
8031018_AE00_OI_GMK03_en_V3-0_2025-05_EHS.pdf
-
-
-
Betjeningsvejledning (BA)
GM32 Cross-Duct
In-situ-gasanalysator, Cross-Duct udgave
EN DA 01/01/2025Sprog:
Dansk
Version:
01/01/2025
Filstørrelse:
4.3 MB
Filnavn:
8030301_ZVG0_OI_GM32_CrossDuct_da_V2-1_2019-04_EHS.pdf
-
-
-
Betjeningsvejledning (BA)
GM32 Measuring Probe
In-situ Gas Analyzer, Measuring Probe Version
EN DA 01/01/2025Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
3.9 MB
Filnavn:
8029938_ZVF9_OI_GM32_Probe_en_V2-1_2019-04_EHS.pdf
-
-
-
Betjeningsvejledning (BA)
GM32 Ex Cross-Duct
In-situ Gas Analyzer, Cross Duct Version
EN DA 01/01/2025Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
7.9 MB
Filnavn:
8029936_AE00_OI_GM32_Ex_3G_CrossDuct_en_V1-8_2017-08_EHS.pdf
-
-
-
Betjeningsvejledning (BA)
GM32 Ex Measuring Probe
In-situ Gas Analyzer, Measuring Probe Version
EN DA 01/01/2025Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
6.5 MB
Filnavn:
8029934_AE00_OI_GM32_Ex_3G_Probe_en_V1-9_2024-08_EHS.pdf
-
-
-
Kort anvisning (KA)
Instrument Air Adapter for in-situ gas analyzers
Description of installation, commissioning and
maintenanceEN DA 01/01/2025Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
969.6 KB
Filnavn:
8029821_AE00_KA_Instrument_Air_Adapter_en_V1-0_2024-05_EHS.pdf
-
-
-
Ex-sikkerhedsanvisning (XA)
Safety Information
for non-Ex analyzer devices
(multi-lingual, also in DE, BG, CS, DA, EL, ES, ET, FI, FR, HR, HU, IT,
LT, LV, NL, NO, PL, PT, RO, RU, SK, SL, SV)Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
2.4 MB
Filnavn:
8030257_XA_Safety_Information_non-Ex_ml_V1-0_2016-06_WEB.pdf
-
-
-
Ex-sikkerhedsanvisning (XA)
GM32 Ex safety information
Safety Information for Ex Devices
(multi-lingual, also in DE, BG, CS, DA, EL, ES, ET, FI, FR, HR, HU, IT,
LT, LV, NL, NO, PL, PT, RO, RU, SK, SL, SV)Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
1.9 MB
Filnavn:
8030259_AE00_XA_GM32_Ex_V2-0_ml_2017-07_EHS_WEB.pdf
-
-
-
Specialdokumentation (SD)
GM32 Ex tightening torques
Tightening torques for GM32 Ex, Cross-Duct Version and Probe Version
Sprog:
Engelsk
Version:
01/01/2025
Filstørrelse:
2 MB
Filnavn:
8030739_AE00_SD_GM32_Ex_en_V1-0_2025-01_EHS.pdf
-
