Oversigt over specifikationer
-
Measurement range
0.004 to 30 mg/l
0.05 to 330 %SAT
0.1 to 700 hPa -
Process temperature
0 to 140 °C
(32 to 284 °F) -
Process pressure
0.02 to 13 bar abs
(0 to 190 psi)
Anvendelsesområde
Memosens COS81D is the ideal oxygen sensor for hygienic applications such as fermentation and inertization. Its precise, long-term stable measurements and its permanent self-monitoring ensure the most reliable measured values to help meet your desired product quality and optimize product yield. Memosens COS81D is not the latest Memosens generation. To get information on the new Memosens COS81E sensor with extended functionality, click here.
Memosens COS81D measures oxygen in applications with high demands to sterility and hygiene such as:
Fermentation
Inertization
Drinking water production
With its international explosion protection approvals, such as ATEX and IECEx, the Memosens COS81D oxygen sensor is suitable for hazardous area use.
A pharma certificate of compliance with sensor serial number specified is available.
Fordele
Hygienic design according to EHEDG and ASME BPE (incl. USP class VI and FDA compliance) avoids cross-contamination and fulfills all GMP and GLP requirements.
The sensor can be used in process applications as well as benchtop fermenters. Providing you with 100% measuring consistency from the first lab trials to the final scaled-up process and your process lab.
More process up-time than ever before thanks to sensor exchange within seconds: precalibrate the sensor in your lab and then swap it into your process with plug & play. It does not need polarization time and is immediately ready to measure.
A built-in reference LED compensates the ageing of the measuring LED. This ensures reliable measured values throughout your entire batch production.
Reduce your maintenance effort: Memosens COS81D does not have a difficult-to-handle electrolyte or sensitive membrane. Just exchange the sensor cap, perform a calibration and you are done.
Memosens COS81D stores important sensor and process data in its intelligent head. The Memobase Plus CYZ71D sensor management software can use all this data to document the complete sensor lifetime offering full traceability with minimal paperwork.
Suitable for CIP/SIP and autoclaving and approved for hazardous area use.
Videoer
-
Standardprodukter
- Pålidelige og robuste med lav vedligeholdelse
Teknisk ydeevne
Enkelhed
-
Specialiserede produkter
- Designet til krævende applikationer
Teknisk ydeevne
Enkelhed
Variabel
| FLEX valg | Teknisk ydeevne | Enkelhed |
|---|---|---|
Fundamental Få dækket dine basale målebehov |
Teknisk ydeevne
|
Enkelhed
|
Lean Administrer nemt dine kerneprocesser |
Teknisk ydeevne
|
Enkelhed
|
Extended Optimer dine processer med innovative teknologier |
Teknisk ydeevne
|
Enkelhed
|
Xpert Til de mest udfordrende applikationer |
Teknisk ydeevne
|
Enkelhed
Variabel |
Loading alternative products
Succeshistorier
Mest downloadede
-
-
Teknisk information (TI)
Memosens COS81D
Engelsk version - 07/2020
Hygienic, optical sensor for measuring oxygen
EN DA 28/07/202014/09/201731/01/2015Sprog:
Engelsk
Version:
28/07/2020
Filstørrelse:
1.4 MB
Filnavn:
TI01201CEN_0320.pdf
-
-
-
Installationsvejledning (EA)
COV81 Installation Instructions
Engelsk version - 09/2017
Maintenance kit for COS81D
EN DA 21/09/201730/11/2016Sprog:
Engelsk
Version:
21/09/2017
Filstørrelse:
234 KB
Filnavn:
EA01189CA2_0217.pdf
-
57 dokumenter
-
-
Teknisk information (TI)
Memosens COS81D
Hygienic, optical sensor for measuring oxygen
EN DA 28/07/202014/09/201731/01/2015Sprog:
Engelsk
Version:
28/07/2020
Filstørrelse:
1.4 MB
Filnavn:
TI01201CEN_0320.pdf
-
-
-
Betjeningsvejledining (BA)
Memosens COS81D
Hygienic, optical sensor for measuring oxygen
EN DA 11/08/202030/04/201814/09/201730/09/2015Sprog:
Engelsk
Version:
11/08/2020
Filstørrelse:
2 MB
Filnavn:
BA01448CEN_0420.pdf
-
-
-
Kort instruktion (KA)
Memosens COS81D
Optisk sensor til måling af opløst oxygen med Memosens-teknologi
EN DA 28/07/202030/04/201831/08/201731/10/2016Sprog:
Dansk
Version:
28/07/2020
Filstørrelse:
629.4 KB
Filnavn:
KA01273CDA_0420.pdf
-
-
-
Installationsvejledning (EA)
Kit COV81
For the maintenance of COS81D/E sensors
EN DA 14/12/2022Sprog:
Engelsk
Version:
14/12/2022
Filstørrelse:
925.5 KB
Filnavn:
EA01460CEN_0122-00.pdf
-
-
-
Installationsvejledning (EA)
COV81 Installation Instructions
Maintenance kit for COS81D
EN DA 21/09/201730/11/2016Sprog:
Engelsk
Version:
21/09/2017
Filstørrelse:
234 KB
Filnavn:
EA01189CA2_0217.pdf
-
-
-
Special Dokumentation (SD)
Hygienic applications
Equipment for liquid analysis
EN DA 30/04/2021Sprog:
Engelsk
Version:
30/04/2021
Filstørrelse:
515.3 KB
Filnavn:
SD02751CEN_0121.pdf
-
-
-
Kompetence Brochure (CP)
For the love of quality water
Fresh ideas for waterworks, distribution networks, surface waters and industrial plants.
Sprog:
Engelsk
Version:
17/06/2019
Filstørrelse:
3.2 MB
Filnavn:
CP01335CEN_0119_Competence in water.pdf
-
-
-
Kompetence Brochure (CP)
Aus Freude an gutem Wasser
Frische Ideen für Wasserwerke, Verteilernetze,Oberflächenwasser und Industrieanlagen
Sprog:
Tysk
Version:
17/06/2020
Filstørrelse:
3.2 MB
Filnavn:
CP01335CDE_0119_Kompetenz in Wasser.pdf
-
-
-
Case Study (CS)
Mesure d’oxygène dans une installation d’inertage
Memosens COS81D augmente la sécurité des process et réduit les coûts
Sprog:
French
Version:
04/03/2020
Filstørrelse:
1.3 MB
Filnavn:
CS01631CFR-0120-Proviron.pdf
-
-
-
Case Study (CS)
Sauerstoffmessung in einer Inertisierungsanlage
Sauerstoffmessung in einer Inertisierungsanlage: COS81D erhöht Prozesssicherheit und senkt Kosten
Sprog:
Tysk
Version:
04/03/2020
Filstørrelse:
1.4 MB
Filnavn:
CS01631CDE_COS81D_Proviron.pdf
-
5 products & bundles
5 produkter
Ofte købt sammen
Tilbehør
- Measuring cable CYK11 Memosens
Relaterede produkter
