Ultrasonic measurement
Time-of-Flight
Prosonic FDU95

Prosonic FDU95 ©Endress+Hauser

Time-of-Flight measuring principle

  • Prosonic FDU95

Ultrasonic sensor for level measurement for connection to FMU9x (measuring range up to 45m)

The FDU95 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas. Maximum measuring range in solids 45m (148ft).

  • Fordele

    • Integrated temperature sensor for Time-of-Flight correction. Accurate measurements are possible, even if temperature changes are present

    • Suited for rough ambient conditions thanks to separate installation from the transmitter
      (up to 300m)

    • Reduced build-...

  • Anvendelsesområde

    Sensor for continuous, non-contact level measurement of bulk materials in silos, on belts, stockpiles and in crushers. Typically used in measurements in low structural heights.

    • Process connection: Thread

    • Temperature: -40 to +80°C or +150°C (-40 to +176°...

Funktioner og specifikationer

Tilbage

Details

  • Measuring principle

    Ultrasonic

  • Characteristic / Application

    Separated version with field housing or top hat rail housing for control cabinet instrumentation, 300m in-between sensor and transmitter

  • Supply / Communication

    4-wire (HART , Profibus DP)

  • Accuracy

    +/- 2mm + 0.17% of measured distance

  • Ambient temperature

    -40 °C ... 80 °C
    or 150 °C
    (-40 °F ... 176 °F
    or 302 °F)

  • Process temperature

    -40 °C ... 80 °C
    or 150 °C
    (-40 °F ... 176 °F
    or 302 °F)

  • Process pressure absolute / max. overpressure limit

    0.7 bar...1.5 bar abs

    (10 psi...22 psi)

  • Main wetted parts

    UP (unsaturated polyester)
    Silicon / PE foam (80°C / 176°F)
    Silicon / stainless steal (150°C / 302°F))

  • Process connection

    G / NPT 1"

  • Blocking distance

    0.7 m / 80 °C
    (2.3 ft / 176 °F)
    0.9 m / 150 °C
    (2.9 ft / 302 °F)

  • Max. measurement distance

    45 m (148 ft)

  • Communication

    Transmitter:
    4 ... 20 mA HART
    Profibus DP

  • Certificates / Approvals

    ATEX, FM, CSA, IEC Ex, INMETRO, NEPSI

  • Options

    Second 4...20mA output

  • Components

    Transmitter:
    FMU90

  • Measuring principle

    Ultrasonic

  • Characteristic / Application

    Separated version with field housing or top hat rail housing for control cabinet instrumentation, 300 m in-between sensor and transmitter

  • Supply / Communication

    4-wire (HART, Profibus DP)

  • Accuracy

    +/- 2 mm + 0.17% of measured distance

  • Ambient temperature

    -40 °C...80 °C

    or 150 °C,

    (-40 °F...176 °F

    or 302 °F)

  • Process temperature

    -40 °C...80 °C

    or 150 °C,

    (-40 °F...176 °F

    or 302 °F)

  • Process pressure absolute / max. overpressure limit

    0.7 bar...1.5 bar abs

    (10 psi...22 psi)

  • Main wetted parts

    UP (unsaturated polyester)

    Silicon / Al PTFE coated

  • Process connection

    G / NPT 1"

  • Blocking distance

    0.7 m / 80 °C,

    (2.3 ft / 176 °F),

    0.9 m / 150 °C,

    (2.9 ft / 302 °F)

  • Max. measurement distance

    45 m (148 ft)

  • Communication

    Transmitter:

    4...20 mA HART

    Profibus DP

  • Certificates / Approvals

    ATEX, FM, CSA, IEC Ex, INMETRO, NEPSI

  • Options

    Second 4...20 mA output

  • Components

    Transmitter:

    FMU90, FMU95

Dokumenter / Vejledninger / Software

Tilbehør / Reservedele

Nr
Order code
Specification

Succeshistorier

Vi anvender cookies til at gemme information på din enhed, som hjælper os med at tilpasse og forbedre din interaktion med os. Yderligere oplysninger om cookies finder du i vores politik til beskyttelse af personlige oplysninger.
Sammenlign produkter